Our L23 standard series DC power supplies are designed to drive HeNe lasers up to 15mW. Each L23 provides greater than 75% efficiency and, therefore, does not require additional heat sinking (with the exception of those drivers operating in the AE power range). See below for additional information on power ranges. Units in the AE power range provide approximately 7.5 square inches of heat sink.
L23101
The L23101 is a standard DC input power supply designed for OEM integration. The unit has an input voltage of 10-14VDC and is available in four power ranges from 2.5 to 25W.
Specifications
AL*
AM*
AH*
AE*
Dimensions, W x L x H, in. [mm]
1.50 x 3.75 x 1.00 [38.10 x 95.25 x 25.40]
Input voltage (VDC)
10 - 14
10 - 14
10 - 14
10 - 14
Starting voltage (kV)**
>8
>10
>10
>10
Output power (W)
2.5 - 7
5 - 10
9 - 17
16 - 25
Output voltage (VDC)
900 - 1600
1300 - 2000
1700 - 3000
2500 - 3500
Output current (mA)
2.5 - 5
3.5 - 6
4.5 - 7
6 - 7.5
Output current ripple (%)
<5 P-P@ nominal voltage
<5 P-P@ nominal voltage
<5 P-P@ nominal voltage
<5 P-P@ nominal voltage
Efficiency (%)
>75
>75
>75
>75
Temperature (°C)
-20 to +50
-20 to +50
-20 to +50
-20 to +50
Approximate tube output (mW)
1
1 - 3
2 - 5
5 - 15
L23106
The compact L23106 is designed to operate laser tubes for applications requiring small size and portability. Applications include barcode scanners and construction work.
Specifications
AL*
AM*
AH*
AE*
Dimensions, W x L x H, in. [mm]
1.06 x 2.20 x 0.66 [26.92 x 55.88 x 16.76]
Input voltage (VDC)
10 - 14
7 - 9.5
10 - 14
7 - 9.5
Starting voltage (kV)**
>8
>8
>8
>8
Output power (W)
2.5 - 6
2.5 - 6
4 - 8
4 - 8
Output voltage (VDC)
1100 - 1400
900 - 1400
1200 - 1800
1200 - 1800
Output current (mA)
2.5 - 5
2.5 - 5
2.5 - 5
2.5 - 5
Output current ripple (%)
<8 RMS @ nominal voltage
<8 RMS @ nominal voltage
<8 RMS @ nominal voltage
<8 RMS @ nominal voltage
Efficiency (%)
>75
>75
>75
>75
Temperature (°C)
-15 to +50
-15 to +50
-15 to +50
-15 to +50
Approximate tube output (mW)
1
1
1 - 3
1 - 3
L23119
The L23119, the mid-size version of our L23 standard series DC power supplies, is available in two power ranges from 3.5 to 10W. Applications include barcode scanners and construction work.
