APM Laser Diode Module With Beam Correction

Home > Products > beam correction > CW modules >
APM

APM

APM Laser Diode Module

•• Drawing (PDF)
•• Operating instructions (PDF)
•• APM with D1 instructions (PDF)
•• APM with D2 instructions (PDF)
•• APM with D3 instructions (PDF)
•• Request quote
•• Email this page to a friend

The APM not only incorporates anamorphic prisms to achieve beam circularity, but it offers added control of the diode's operating temperature via an active temperature control circuit, thermoelectric cooler, and fan. In addition to promoting stability of wavelength and output power, these temperature control mechanism work to extend diode lifetime.

The APM operates in constant current mode or automatic power control mode. Built-in potentiometers enable users to adjust or change the drive current, laser power, or active temperature control parameters, and a 7-pin connector allows for DVM-compatible monitoring of these parameters.


Specifications
Dimensions, Ø x L, in. [mm]			1.50 x 6.97 [38.05 x 177.04]
Operating voltage (VDC)			12 ± 1
Max. operating current (mA)			1350
Max. laser drive current (mA)			500
Temperature stability (°C)			0.5
Temperature range (°C)			10 - 35
Physical diode compatibility			9mm, 5.6mm
Diode compatibility			M- & N-type in APC mode; M-, N-, & P-type in CC mode
Beam size at exit, 1/e² (mm)			2.7
Recommended options			D1, D2, D3, T

IQ1C Laser Diode Module

Customize This Module
Selecting a wavelength here will begin a process to configure a customized part number based on your requirements. At the end of this process, you will have an opportunity to request a quote by email.

tel: 501.407.0712 • fax: 501.407.0036
email: sales@powertechnology.com