SPMT Separated Geometry Laser Diode Module With TTL Modulation

Home > Products > basic optics > TTL Modulated
Lasers > SPMT

SPMT

SPMT Separated Geometry Laser Diode Module With TTL Modulation

•• Drawing (PDF)
•• Operating instructions (PDF)
•• SPMT with D2 instructions (PDF)
•• Request quote
•• Email this page to a friend

The SPMT is a separated geometry version of our PMT module. By housing the diode and optics separately from the driver, this special configuration promotes easy positioning of the unit within the design constraints of your application. Click here for information on our separated geometry lasers with CW output.

The SPMT operates in constant current mode on 5VDC input and is designed for digital beam modulation from CW to 20MHz. Users may select either our TMD219-100 or TMD219-200 driver.


Specifications
Dimensions, in. [mm]			head, Ø x L: 0.5 x 1.24 [12.65 x 31.42] driver, W x L x H: 0.88 x 1.33 x 0.46 [22.4 x 33.8 x 11.7]
Operating voltage (VDC)			5 ± 0.5
Max. operating current (mA)			280
Max. laser drive current (mA)			0 - 200
Mod. frequency range (MHz)			CW - 20
Rise/fall times (ns)			6/15*
Propagation delay (ns)			30*
Control signal connector type			BNC
Physical diode compatibility			9mm, 5.6mm
Diode compatibility			M-, N-, & P-type
Recommended options			D2, X, X25, X26

*Maximum modulation frequency and rise/fall times may vary depending on the laser diode chosen.

IQ1C Laser Diode Module

Customize This Module
Selecting a wavelength here will begin a process to configure a customized part number based on your requirements. At the end of this process, you will have an opportunity to request a quote by email.

tel: 501.407.0712 • fax: 501.407.0036
email: sales@powertechnology.com